Using Colorsource - ETC ColorSource User Manual

Using ColorSource

ColorSource User Manual
The Color Changer sets its frame position according to the DMX512 level
it receives from the control console using the channels set on the Power
Supply. The following chart shows the level settings that correspond with
each frame position, and the color of that frame, if you are using the
standard ColorSource gelstring. If you are using a custom gelstring, of
course, the colors are different, but the channels and frames are the
same.
Channel Frame
level position color
0 Frame 1
11 Frame 2
22 Frame 3
33 Frame 4
44 Frame 5
55 Frame 6
66 Frame 7
77 Frame 8
88 Frame 9
99 Frame 10
If you send a channel level that is between the values shown, you can
create split frame effects. For example, if you send a level of 50, the
Color Changer positions the gelstring halfway between frame 5 and
frame 6 creating a blend of the two colors.
Standard
Clear
Antique Rose
Chorus Pink
Magenta
Light Red
Deep Amber
Mellow Yellow
Light Green
Aztec Blue
Light Purple
7