Power Supply; Cables - ETC ColorSource User Manual

ColorSource User Manual

Power Supply

The Power Supply converts the DMX512 signal level into a control
signal and sends this control signal along with low voltage AC on
one cable to power each color changer. The Power Supply fea-
tures a DMX512 bypass relay to pass the DMX512 signal to the
DMX512 output connector in the event of loss of power supply
AC power.
The Power Supply features a liquid crystal display (LCD) that lets
you select between the Channel display and the Autoload display.
When you turn it on, the Power Supply displays a scrolling intro-
duction including the Power Supply software version, then goes to
the Channel display.
The Channel display shows the 12 DMX512 channels and the
message DMX OK or NO DMX. This indicates whether or not the
Power Supply is connected to a DMX512 source.
Press [Menu] to switch from the Channel display to the Autoload
display.The Autoload display walks you through the process of
loading a gelstring onto the Color Changer's rollers and testing it.

Cables

A ColorSource cable connects each Color Changer to one of the
12 Power Supply outputs and provides the Color Changer with
power and control signal. A DMX512 cable connects the Power
Supply to a DMX512 signal source, usually a lighting control
console
001--012 DMX OK
MENU
[–] [+] YES
NO
POWER
Power Supply
display
Power Supply
controls
9