Introduction; Product Information; User Manual; Malfunctions - Intellibot Robotics HydroBot Series User Manual

User Manual - HydroBot Robotic Floor Scrubber

Introduction

Product Information

Always use Intellibot Robotics original parts and accessories, explicitly approved for the HydroBot Robotic Floor Scrubber.
These parts have been tested to determine their reliability, safety and suitability. Intellibot Robotics approved parts and
accessories are available through the service department: (1-888-837-0002).

User Manual

This manual contains a lot of practical information. Read it carefully and become familiar with the HydroBot Robotic Floor
Scrubber before operating.
For longer service life of the robot, follow the instructions and any warnings contained within this manual. Damage caused
by failure to follow these instructions may not be covered by the limited warranty.

Malfunctions

If a malfunction occurs with the HydroBot Robotic Floor Scrubber, especially one that may affect its safe operation,
immediately contact Intellibot Robotics (1-888-837-0002) to have the malfunction diagnosed and corrected. If any service
matter is not handled satisfactorily, please contact Intellibot Robotics management at the following address:
5410 SW Macadam Ave., Ste. 100, Portland, OR 97239.

Service and Warranty Information

The installation packet contains detailed information concerning any warranties that cover the robot including:
✓ One year limited warranty
✓ Software license agreement

Customer Assistance

Intellibot Robotics' support program provides factory-trained and certified technical help in the event of a malfunction. An
Intellibot Customer Service Representative will answer calls to the toll-free support program 24 hours per day, 365 days
per year.
1-888-837-0002

Where to find it

This manual is divided into several sections:
Operator Controls: Overview of operator controls
Operation: Information on Robotic Floor Scrubber equipment and operation.
Robotic Floor Cleaning: Instruction on how to operate the robot.
Settings: Instruction on how to set parameters such language, metric (or imperial), and default water flow.
Administration: Instruction on how to add operators and operator privileges.
Reports: Instruction on how to view reports from the User Interface (UI) display panel.
Site Acquisition: Instruction on how to acquire a site (areas, zones, and routes).
Diagnostics: Instruction on how to run diagnostics.
Troubleshooting: Assisting in the event of a malfunction.
HydroBot Robotic Floor Scrubber Care: Caring for the robot.
Technical Data: Technical data for the robot, including parts list for ordering parts.
WARNING NOTICES APPEAR IN CAPITAL BOLD TYPE FACE.
© 2012 Intellibot Robotics, LLC All Rights Reserved v2.5 Page 1