User Manual - HydroBot Robotic Floor Scrubber
Touch Shield Zones
1. To begin, access the system menu by pressing the right arrow (as
shown by the red arrow).
2. To access the diagnostics menu, press
3. From the diagnostics menu, perform the Touch Shield diagnostics by
pressing
4. Touch Shield diagnostics allow the touch shield sensing zones to be
tested. To test a zone, depress the touch shield (see screen depicting
zone 5 being depressed). Note the count of zone touches shown on
the screen.
5. To exit the diagnostic, press
© 2012 Intellibot Robotics, LLC All Rights Reserved v2.5
.
.
(shown by red arrow).
Page 24