Technical Data; Name(S); Model(S); Construction - Intellibot Robotics HydroBot Series User Manual

User Manual - HydroBot Robotic Floor Scrubber

Technical Data

Name(s)

HydroBot

Model(s)

RS1000s (Robotic Scrubber)

Construction

Frame:
Casters:
Robot Height:
Robot Width:
Robot Length:
Squeegee Width:
Weight (machine only):
Weight (with battery pack):
Battery Pack Weight:
Battery Exchange Cart Weight:
Battery Exchange Cart Weight (with
battery pack):

Electrical Requirements

Batteries:
Run Time:
Charger Unit:

Robotic Features

Main Computer:
Drive Subsystem:
Controls:
Navigation:
Touch Shield:
Floor Sensors:
© 2012 Intellibot Robotics, LLC All Rights Reserved v2.5
Power coated 5052 Aluminum and stainless steel
Two 3 1/2 inch (889 cm), polyurethane, swivel type
43 1/8 in. (110 cm)
32 3/8 in. (83 cm)
48 3/8 in. (123 cm)
32 3/8 in. (83 cm)
426 lbs. (194 kg)
720 lbs. (327 kg)
292 lbs. (133 kg)
95 lbs. (44 kg)
387 lbs. (176 kg)
(4) Sealed gel cell deep cycle, 180 AH, 6 VDC output, length 10.25 inches
(260mm), width 7.13 inches (181 mm), height 10.88 inches (276 mm)
Approximately (4) hours
20 Amp, 24 VDC output, 115 VAC input with automatic shut-off
Monitors all functions and commands the robot to perform memorized
cleaning routines
Monitors and controls the robot's movement and position
Manual and electronic
(15) Ultrasonic sonar sensing system with (2) infrared sensors providing
the robot with a 360-degree coverage
(6) Zones that cover all sides of the machine up to 8 inches off of the
floor
(4) Infrared sensors that check the right and left front and right and left
rear corners of the machine
Page 32