Operator Administration; Operator Setup; Acquiring A Site - Intellibot Robotics HydroBot Series User Manual

User Manual - HydroBot Robotic Floor Scrubber

Operator Administration

Operator Setup

1. To access the system menu, press the right arrow (as shown by the red
arrow).
2. To set up operator privileges, press
3. To add an operator, from the operator setup menu, press
an existing operator, press the name to highlight, then press
inactivate an operator, press the name to highlight, then press
4. To enter the new operator name, press
passcode, press
To enter the operator email address, press
manual use privileges, press
privilege). To turn (on/off) robotic mode privilege, press
(on/off) learning privilege, press
reporting, press
allow access to diagnostics, press

Acquiring a Site

During learning (acquisition mode), the robot has the capability of capturing and recording physical floor dimensions
known as a "Site." Routes define which areas are to be cleaned; areas can be grouped into zone(s). Each hallway or aisle
can be captured and recorded as an area.
© 2012 Intellibot Robotics, LLC All Rights Reserved v2.5
(shown by red arrow).
. To enter the operator's
. To enter the operator's phone number, press
(note the green check mark indicating
. To turn (on/off) access to
. To turn (on/off) admin privileges, press
.
; to edit
. To
.
. To turn (on/off)
. To turn
. To
.
Page 10