Intellibot Robotics HydroBot Series User Manual page 22

User Manual - HydroBot Robotic Floor Scrubber
3. The next menu presents the list of zones. Determine which zone
contains the area to be edited. To highlight the zone, press on the name.
Proceed by pressing
4. The next menu presents the list of areas contained within the zone.
Determine which area is to be edited. To highlight the area, press on the
name, then press
5. The next menu presents the left wall hug. To edit the left wall hug, begin
by pressing
6. Use the and
Note: To increase in larger increments, press the
increments, press the
left wall position.
7. When finished, press
previous screen, press
8. Next screen presents the right wall hug. Use the same procedure as
used in editing the left wall hug.
9. When finished, press
previous screen, press
© 2012 Intellibot Robotics, LLC All Rights Reserved v2.5
.
.
. Note the pencil indicating an active edit.
to change the left wall hug.
again. The left offset cannot be greater than the
to proceed to next screen. To go back to the
.
to proceed to next screen. To go back to the
.
; to return to smaller
Page 16