Jenn-Air JES9750CAB00 Installation Instructions Manual page 53

7=
Remove the bracket from the other side of the blower motor,
rotate 180 ° and secure with 4 Iocknuts.
9.
Mount blower motor to wood spacers using 4 - #8 x 3A" hex
head screws provided.
NOTE: Vent system will be connected after range has been
moved into it's final location. "See Connect Range to
Downdraft System" section.
Top View
B
j_
8. Position 2 wood spacers and mount them to the floor.
Top View
F
i ii
B_
/
/
J
/
/
/
A. Wood spacers
B. Mounting bracket
C. Blower
10. Go to the "Electrical Connection" section.
A. 2" x 4" (5.0 x 10.2 cm) wood spacers
B. 2 _" (7.3 cm) from back wall to edge of wood spacer
C. 83_" (22.2 cm)
D. 2 _" (5.8 cm) centerline of opening to wood spacer
13