Display Menu; Schedule Menu - Tekmar tekmarNet 557 Installation & Operation Manual

Schedule Menu (2 of 2)
Setting
SCHEDULE
Select if the thermostat should change the temperature
automatically using a programmable schedule.
OFF = Programmable schedule is not used.
Zone = Applies to this thermostat only.
Master 1, 2, 3, 4 = In charge of one of four available
network schedules.
Member 1, 2, 3, 4 = Follows selected network
schedule.
Access Level: Installer, User
Conditions: In a tekmarNet
in Installer access level only.
EVENT PER DAY
Select the number of temperatures per day.
Access Level: Installer, User
Conditions: Schedule setting is set to Zone or
Master 1, 2, 3, 4.
24 HOUR / 7 DAY
Access Level: Installer, User
Conditions: Schedule setting is set to Zone or Master
1, 2, 3, 4.
OPTIMUM START
Select whether or not to use optimum start. The
thermostat learns the heat up and cool down rates
of the room and starts heating or cooling in advance
of Event 1 or Event 3.
Access Level: Installer, User
Conditions: A schedule must be in use.
Display Menu (1 of 2)
Setting
UNITS
Select Fahrenheit or Celsius as the temperature
units.
Access Level: Installer, User
Conditions: Always available.
A Watts Water Technologies Company
®
system, settings adjustable
15 of 48
Display
Range: OFF, Zone, Master 1, 2, 3,
4, Member 1, 2, 3, 4
Default: OFF
Range: 2 or 4
Default: 2
Range: 24 hour or 7 day
Default: 24 hour
Range: OFF or ON
Default: ON
Display
Range: °F or °C
Default: °F
© 2012 557_D - 08/12