Tekmar tekmarNet 557 Installation & Operation Manual page 18

Monitor Menu (2 of 5)
Setting
SENSOR 2
The temperature measurement from the sensor 2
input wiring terminals.
Access Level: Installer
Conditions: Setup menu setting Sensor 2 is set to
ROOM, FLOR, or OUT.
SENSOR 3
The temperature measurement from the sensor 3
input wiring terminals.
Access Level: Installer
Conditions: Setup menu setting Sensor 3 is set to
ROOM, FLOR, or HUM.
HUMIDITY LOCAL
The built-in relative humidity sensor measurement.
Access Level: Installer
Conditions: Setup menu setting Humidity Sensor
is set to On.
HUMIDITY EXTERNAL
The relative humidity measurement from the external
humidity sensor.
Access Level: Installer
Conditions: Setup menu setting Sensor 3 is set to
HUM.
OUTDOOR HIGH
The highest recorded outdoor air temperature
measurement. Touch the number and the ENTER
key to reset.
Access Level: Installer, User
Conditions: An outdoor temperature is available.
OUTDOOR LOW
The lowest recorded outdoor air temperature
measurement. Touch the number and the ENTER
key to reset.
Access Level: Installer, User
Conditions: An outdoor temperature is available.
A Watts Water Technologies Company
Display
Range: -22 to 266°F
(-30.0 to 130.0°C)
Default: Not applicable.
Range: -22 to 266°F
(-30.0 to 130.0°C)
Default: Not applicable.
Range: 0 to 100%
Default: Not applicable.
Range: 0 to 100%
Default: Not applicable.
Range: -76 to 149°F
(-60.0 to 65.0°C)
Default: Not applicable.
Range: -76 to 149°F
(-60.0 to 65.0°C)
Default: Not applicable.
18 of 48
© 2012 557_D - 08/12