Table of Contents
Advertisement
Temperature Adjustment
Permanent Adjustment - No Schedule
When no programmable schedule is used, touch the up or down arrows to permanently
set the "Set Heat Room" or "Set Cool Room" temperature. This thermostat is capable
of controlling both air and floor temperature.
Permanent Adjustment - With Schedule
When a programmable schedule is used, there are two room heating temperatures
available, one for the
touching the up or down arrows to change the temperature, only the temperature
for the current time period is changed.
1. To adjust the temperature for both time periods, press and hold the Home button
for 3 seconds to enter the programming menus.
2. Enter the "SET TEMP" menu to adjust the following settings:
•
Set Heat Room
•
Set Heat Room
•
Set Heat Room AWAY (air heating or air heating with floor sensor)
•
Floor Min
•
Floor Min
•
Set Cool Room
•
Set Cool Room
•
Set Cool Room AWAY (air cooling)
Temporary Hold
Temporary hold allows a user to change the temperature for a period of time and then
automatically return to the permanent temperature setting. This is especially useful
in commercial buildings that are in use for short amounts of time. When selected,
touching the up or down arrows changes the temperature for either 3, 6, 9 or 12 hours.
If the thermostat is using a schedule, 'Schd' provides a temporary hold until the next
schedule event time. After the temporary hold time expires, the thermostat returns to
normal operation. By default, the temporary hold feature is off.
When the temporary hold
feature is enabled, touching
the up or down arrow
displays 'TEMPORARY
HOLD'.
A Watts Water Technologies Company
time period and another for the
(air heating or air heating with floor sensor)
(air heating or air heating with floor sensor)
(air heating with floor sensor)
(air heating with floor sensor)
(air cooling)
(air cooling)
- --- -- --- ---- --- --- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
- -- --- --- --- --- -- - -- - - - - - - - - - - - -- - - -- - --- - - -- - - -- - - - -
Use the Up or Down
arrow to select a
temperature.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - -- -- - - - - - - - - - - - - - - -- -
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - -- - -- -- - - - - - - - - - - - - - - - - -
Tap the hour
setting until
the preferred
length of time
is displayed.
Cancel the
temporary
'HOLD' is displayed while the
thermostat is operating at the
temporary hold temperature.
38 of 48
Section I
time period. When
hold.
© 2012
557_D - 08/12
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
