ZyXEL Communications MGS-3712/MES-3728 User Manual page 76

Chapter 7 System Status and Port Statistics
The following table describes the labels in this screen.
Table 7 Status: Port Details
LABEL
Port Info
Port NO.
Name
Link
Status
LACP
TxPkts
RxPkts
Errors
Tx KB/s
Rx KB/s
Up Time
Tx Packet
The following fields display detailed information about packets transmitted.
TX Packet
Multicast
Broadcas
t
Pause
Tagged
Rx Packet
The following fields display detailed information about packets received.
RX
Packet
Multicast
Broadcas
t
Pause
Control
TX Collision
The following fields display information on collisions while transmitting.
76
DESCRIPTION
This field displays the port number you are viewing.
This field displays the name of the port.
This field displays the speed (either 10M for 10Mbps, 100M for 100Mbps
or 1000M for 1000Mbps) and the duplex (F for full duplex or H for half
duplex). It also shows the cable type (Copper or Fiber).
If STP (Spanning Tree Protocol) is enabled, this field displays the STP state
of the port (see Section 13.1 on page 125
If STP is disabled, this field displays FORWARDING if the link is up,
otherwise, it displays STOP.
This field shows if LACP is enabled on this port or not.
This field shows the number of transmitted frames on this port
This field shows the number of received frames on this port
This field shows the number of received errors on this port.
This field shows the number kilobytes per second transmitted on this port.
This field shows the number of kilobytes per second received on this port.
This field shows the total amount of time the connection has been up.
This field shows the number of good packets (unicast, multicast and
broadcast) transmitted.
This field shows the number of good multicast packets transmitted.
This field shows the number of good broadcast packets transmitted.
This field shows the number of 802.3x Pause packets transmitted.
This field shows the number of packets with VLAN tags transmitted.
This field shows the number of good packets (unicast, multicast and
broadcast) received.
This field shows the number of good multicast packets received.
This field shows the number of good broadcast packets received.
This field shows the number of 802.3x Pause packets received.
This field shows the number of control packets received (including those
with CRC error) but it does not include the 802.3x Pause packets.
for more information).
MES-3728 User's Guide