ZyXEL Communications MGS-3712/MES-3728 User Manual page 124

Chapter 12 Filtering
Table 23 Advanced Application > Filtering (continued)
LABEL
Action
MAC
VID
Add
Cancel
Clear
Index
Active
Name
MAC
Address
VID
Delete
Cancel
124
DESCRIPTION
Select Discard source to drop the frames from the source MAC address
(specified in the MAC field). The Switch can still send frames to the MAC
address.
Select Discard destination to drop the frames to the destination MAC
address (specified in the MAC address). The Switch can still receive frames
originating from the MAC address.
Select Discard source and Discard destination to block traffic to/from
the MAC address specified in the MAC field.
Type a MAC address in valid MAC address format, that is, six hexadecimal
character pairs.
Type the VLAN group identification number.
Click Add to save your changes to the Switch's run-time memory. The
Switch loses these changes if it is turned off or loses power, so use the Save
link on the top navigation panel to save your changes to the non-volatile
memory when you are done configuring.
Click Cancel to reset the fields to your previous configuration.
Click Clear to clear the fields to the factory defaults.
This field displays the index number of the rule. Click an index number to
change the settings.
This field displays Yes when the rule is activated and No when is it
deactivated.
This field displays the descriptive name for this rule. This is for identification
purpose only.
This field displays the source/destination MAC address with the VLAN
identification number to which the MAC address belongs.
This field displays the VLAN group identification number.
Check the rule(s) that you want to remove in the Delete column and then
click the Delete button.
Click Cancel to clear the selected checkbox(es) in the Delete column.
MES-3728 User's Guide