ZyXEL Communications MGS-3712/MES-3728 User Manual page 109

Note: Protocol-based VLAN applies to un-tagged packets and is applicable only when
you use IEEE 802.1Q tagged VLAN.
Figure 54 Advanced Application > VLAN > VLAN Port Setting > Protocol Based
VLAN
The following table describes the labels in this screen.
Table 19 Advanced Application > VLAN > VLAN Port Setting > Protocol Based
VLAN Setup
LABEL
Active
Port
Name
Ethernet-
type
VID
Priority
MES-3728 User's Guide
DESCRIPTION
Check this box to activate this protocol based VLAN.
Type a port to be included in this protocol based VLAN.
This port must belong to a static VLAN in order to participate in a protocol
based VLAN. See Chapter 9 on page 95
VLANs.
Enter up to 32 alpha numeric characters to identify this protocol based
VLAN.
Use the drop down list box to select a predefined protocol to be included in
this protocol based VLAN or select Others and type the protocol number in
hexadecimal notation. For example the IP protocol in hexadecimal notation
is 0800, and Novell IPX protocol is 8137.
Note: Protocols in the hexadecimal number range of 0x0000 to 0x05ff
are not allowed to be used for protocol based VLANs.
Enter the ID of a VLAN to which the port belongs. This must be an existing
VLAN which you defined in the Advanced Applications > VLAN screens.
Select the priority level that the Switch will assign to frames belonging to
this VLAN.
Chapter 9 VLAN
for more details on setting up
109