ZyXEL Communications MGS-3712/MES-3728 User Manual page 149

Table 33 Advanced Application > Bandwidth Control (continued)
LABEL
Active
Egress Rate
Apply
Cancel
MES-3728 User's Guide
DESCRIPTION
Select this check box to activate egress rate limits on this port.
Specify the maximum bandwidth allowed in kilobits per second (Kbps) for
the out-going traffic flow on a port.
Click Apply to save your changes to the Switch's run-time memory. The
Switch loses these changes if it is turned off or loses power, so use the
Save link on the top navigation panel to save your changes to the non-
volatile memory when you are done configuring.
Click Cancel to reset the fields.
Chapter 14 Bandwidth Control
149