Table of Contents
Advertisement
How to Open the Settings
Page
1 Enter the URL of camera in the address
bar of Internet Explorer
The factory default URL is
0
"http://192.168.0.2".
Memo :
For details on the IP address to specify for the
0
URL of the camera, refer to the following.
(A P24 [IP Address Setting Procedure] )
2 Enter the user name and password.
The factory default is "admin" and "jvc".
0
After entering a correct user name and
0
password, the Built-in Viewer of the camera
is displayed.
.
3 Click [Advanced Settings].
[Basic Setting1] page will be opened if
0
accessed by user name "admin".
(A P30 [[Basic Setting1] Page] )
[Basic Setting2] page will be opened if
0
accessed by user name "operator".
(A P31 [[Basic Setting2] Page] )
[Miscellaneous] page will be opened if
0
accessed by user name "user".
(A P49 [[Miscellaneous] Page] )
Built-in Viewer Menu List
The following items can be set. Depending on the
logged-in user name, some items may not be set
due to the access authorization. In such case,
items won't be displayed.
[Basic Setting1] (*1) ..................................... P 30
[Basic Setting2] (*2) ..................................... P 31
[Advanced Settings] .................................... P 33
- [Camera] (*2) ........................................... P 33
- [Encoding] (*2) ........................................ P 37
- [Alarm] (*2) .............................................. P 40
- [Alarm Environment] (*2) ......................... P 42
- [Alarm Output] ..................................... P 42
- [PTZ] (*2) ................................................. P 43
- [Limit] ................................................... P 43
- [Preset Position Speed] ....................... P 44
- [Auto Flip] ............................................ P 44
- [Network] (*1) .......................................... P 45
- [IP Setting] ........................................... P 45
- [Other] ................................................. P 45
- [Protocol] (*1) .......................................... P 46
- [Time] (*1) ............................................... P 47
- [Password] (*1) ........................................ P 47
- [Maintenance] (*1) ................................... P 48
- [Miscellaneous] ....................................... P 49
- [Operation] (*2) ........................................ P 49
- [Operation] .......................................... P 49
- [Log] .................................................... P 49
- [Settings] (*2) .......................................... P 50
- [Position List] (*2) .................................... P 50
*1
Displayed if logged in by user name "admin".
*2
Displayed if logged in by user name "admin"
or "operator".
How to Open the Settings Page
29
Advertisement
Table of Contents
