Digital Unix And Openvms Alpha (Srm) Console Commands - DEC AlphaServer 1000A Owner's Manual

Setup Menu Functions
The Setup menu contains menu items that allow you to perform the following tasks:
Set the system time
Set the default system partition
Configure the system floppy drives and keyboard
Manage the Windows NT (ARC) boot selections
Set the system to boot automatically
Run the EISA Configuration Utility
Edit the system environment variables
Reset the system to factory defaults
Set the default operating system and system firmware
Return to the Supplementary menu, with or without saving Setup menu changes

Digital UNIX and OpenVMS Alpha (SRM) Console Commands

There are two levels of Digital UNIX and OpenVMS Alpha (SRM) console
commands:
Basic
Comprehensive
Basic Commands
Use basic commands to perform common tasks described in this guide. Table 4-1
lists each console task and provides the corresponding command and its syntax.
Note: To limit the screen display to 23 lines at a time, use:
>>> more [filename].
>>> [command] | more
AlphaServer 1000A Owner's Guide
Example:
.
>>> more el
Example:
>>> show config | more
Or, use
Basic Operation 4-11