DEC AlphaServer 1000A Owner's Manual page 117

Example 6-3 The show device Command Display
>>> show device
dka400.4.0.6.0
dva0.0.0.0.1
ewa0.0.0.2004.0
ewb0.0.0.11.0
pka0.7.0.6.0
The show memory Command
The show memory command displays information for each memory module in the
system. A sample of the show memory display is shown in Example 6-4.
Example 6-4 The show memory Command Display
>>> show memory
48 Meg of System Memory
Bank 0 = 16 Mbytes (4 MB Per Simm) Starting at
0x00000000
Bank 1 = 16 Mbytes (4 MB Per Simm) Starting at
0x01000000
Bank 2 = 16 Mbytes (4 MB Per Simm) Starting at
0x02000000
Bank 3 = No Memory Detected
The set and show Commands
The and
set show
set environment variables when you configure a system.
Synopsis:
set envar value [-default] [-integer] [-integer] -[string]
show envar
Arguments:
AlphaServer 1000A Owner's Guide
DKA400
DVA0
EWA0 08-00-2B-E5-6A-41
EWB0 08-00-2B-E1-03-19
PKA0 SCSI Bus ID 7
commands are used to set environment variables. Typically, you
CAUTION: Environment variables must be entered
exactly as shown, not abbreviated. They will not be
recognized by the system in abbreviated form.
RRD45 2893
2.10
Configuring 6-9