Replacing The Top Cover And Side Panels - DEC AlphaServer 1000A Owner's Manual

Replacing the Top Cover and Side Panels

Follow these steps and refer to Figure 5-3 to replace the top cover and side panels of
the system unit:
1. Align the guides on the top and bottom inside of the side panel with the lip of the
system unit frame.
2. Tilt the side panel top towards the unit and lift the flange at the top of the panel
over the system unit frame.
3. Slide the panel forward into position. (Repeat steps 1 to 3 for the other panel.)
4. Align the top cover with the top of the side panels and slide the cover gently onto
the unit from the rear. Hold down the top cover release latch until the top cover
is in place, and then release it to secure the cover and panels.
5. Lock the top cover and side panels using the system unit key.
6. Set the On/Off switches on all external options connected to the system to the
"on" position.
7. Set the On/Off switch on the system unit to the "on" position.
Figure 5-3 Replacing the Top Cover and Side Panels
Top Cover
Release Latch
AlphaServer 1000A Owner's Guide
Top Cover
Right Side
Panel
Top Side
Panel Guide
Bottom Side
Panel Guide
Installing and Removing Components
MA00915
5-5