NEC N8100-1410F User Manual page 168

4-78 Configuring Your Server
The setting level of Universal RAID Utility and the setting value
Item
Rebuild Priority
Rebuild Rate (WebBIOS)
Patrol Read Priority
Patrol Read Rate (WebBIOS)
Consistency Check Priority
Consistency Check Rate
(WebBIOS)
NOTES:
WebBIOS can set BGI Rate (Background Initialize Priority). But
Universal RAID Utility can't set it.
Universal RAID Utility can set Initialization Priority. But, Internal
RAID Controller does not have the function of the setting of
Initialization Priority. Therefore, Universal RAID Utility doesn't
display [Initialization Priority] in the property of RAID Controller.
Also, it will fail that you change the Initialization Priority by
raidcmd command.
Setting level of Universal RAID Utility
High
Middle
Low
High
Middle
Low
High
Middle
Low
Setting value
90
50
10
90
50
10
90
50
10