Updating The System - Applying Service Pack - NEC N8100-1410F User Manual

Updating the System - Applying Service Pack -

Update the system in the situation below:
CPU is expanded (expanded to single processor to multi-processor).
Modified system configuration.
Recovered the system using recovery process.
The system update brings the correction program provided by Microsoft to be applied to reinforce
the system security. The system update is recommended.
Service Pack 2 need not be applied again when Windows Server 2003 CD-ROM which Service
Pack 2 is included is used and it is installed.
Go on the section of "Updating the System".
Perform "Updating the System" and application of the "Hotfix (KB921411)".
IMPORTANT:
the System" and "Hotfix (KB921411)".
Modified system configuration
Recovered the system using recovery process.
NOTE:
Service Pack 2, the application of "Hotfix (KB921411)" is not required.
Application Process of the Hotfix (KB921411)
Apply the "Hotfix (KB921411)" before execute "Updating the System".
1.
Log on to the system by the account with administrator authority to the server (such as
administrator).
2.
Insert the NEC EXPRESSBUILDER DVD into the optical disk drive of the server.
3.
Click Start menu and [Run], and then execute the following command.
<When the English version of Windows Server 2003 R2 is used>
\002\win\winnt\dotnet\qfe\enu\kb921411.exe
<When the Simplified Chinese version of Windows Server 2003 R2 is used>
\002\win\winnt\dotnet\qfe\chs\kb921411.exe
<When the French version of Windows Server 2003 R2 is used>
\002\win\winnt\dotnet\qfe\fra\kb921411.exe
In the situation below, make sure to apply "Updating
If you use Windows Server 2003 CD-ROM which includes
Installing Windows Server 2003 E-11