Table of Contents
Advertisement
BMC LAN Configuration Submenu
Option
IP Address
Subnet Mask
Default Gateway
DHCP
Web Interface
HTTP
HTTP Port
Number
HTTPS
HTTPS Port
Number
Command Line
Interface
Telnet
Telnet Port
Number
SSH
SSH Port Number
Clear BMC
Configuration
Event Log Configuration Submenu
Option
System Event Log
Clear All Event
Logs
Parameter
[192.168.001.001]
[255.255.255.000]
[000.000.000.000]
[Disabled]
Enabled
–
[Disabled]
Enabled
[80]
[Disabled]
Enabled
[443]
–
[Disabled]
Enabled
[23]
[Disabled]
Enabled
[22]
[Enter]
Parameter
–
–
Description
Specify an IP address for
management LAN.
Specify a subnet mask for
management LAN.
Specify a default gateway for
management LAN.
Set to [Enabled] to obtain an IP
address from DHCP server
automatically. If you intend to specify
an IP address manually, set to
[Disabled].
–
Set to [Enabled] to use HTTP
communication for Web interface.
Specify the TCP port number which
the management LAN uses for HTTP
communication.
Set to [Enabled] to use HTTPS
communication for Web interface.
Specify the TCP port number which
the management LAN uses for HTTPS
communication.
–
Set to [Enabled] to use Telnet
communication as a command line
interface.
Specify the TCP port number to be
used for Telnet communication.
Set to [Enabled] to use SSH
communication as a command line
interface.
Specify the TCP port number to be
used for SSH communication.
Press Enter and select "Yes" to
initialize the BMC configuration.
Description
System Event Log submenu is
displayed.
Press Enter and select "Yes" to clear
the system event log.
Configuring Your Server 4-19
Your Setting
[
]: Factory-set
Your Setting
Advertisement
Table of Contents
Troubleshooting
