Print Darkness Setting; Print Speed Adjustment - SATO M5900RV Operation Manual

3. Configuration

3.3.3 Print Darkness Setting

There are five PRINT DARKNESS (or heat range) settings on the
M5900RV, (1, 2, 3, 4, and 5). The higher numbers represent darker
settings. The current setting is indicated by an underline under one
of the range settings.
To change the setting perform the following steps:
1. Use the LINE key to step the underlined cursor to the desired
setting.
2. Once the correct setting is underlined, press the FEED key to
accept the setting and advance to the next adjustment.
Note:

3.3.4 Print Speed Adjustment

There are four PRINT SPEED settings on the M5900RV, (2 = 50
mm/s, 3 = 75 mm/s, 4 = 100 mm/s, 5 = 125 mm/s). The setting is
listed on the bottom line of the display. The current setting is indi-
cated by an underline under one of the speed settings.
To change the setting perform the following steps:
1. Use the LINE key to step the underlined cursor to the desired
setting.
2. Once the correct setting is underlined, press the FEED key to
accept the setting and advance to the next adjustment.
Note:
28
This setting can be overridden by software.
This setting can be overridden by software.
Operation Manual
M5900RV