Operation Manual
3.3.3 Print Darkness Setting
There are three PRINT DARKNESS (or heat range) settings. The
higher numbers represent darker settings. The current setting is
indicated by a blinking cursor on one of the range settings.
To change the setting perform the following steps:
1. Use the LINE key to step the blinking
cursor to the desired setting.
2. Once the correct setting is selected,
press the FEED key to accept the setting and advance to the
next adjustment.
Note:
This setting can be overridden by software.
3.3.4 Print Speed Adjustment
There are three PRINT SPEED settings. The setting is listed on
the bottom line of the display. The current setting is indicated by a
blinking cursor on one of the speed settings.
To change the setting perform the following steps:
1. Use the LINE key to step the blinking
cursor to the desired setting.
2. Once the correct setting is selected,
press the FEED key to accept the setting and advance to the
next adjustment.
Note:
This setting can be overridden by software.
CL608e/612e
3. Configuration
PRINT DARKNESS
1(L) 2(M) 3(D)
PRINT SPEED
4 6 8
27