Operation Panel - SATO M5900RV Operation Manual

2. Introduction

2.6 Operation Panel

LINE Key: Momentary switch.
Pressing this key toggles the printer
between the on-line and off-line
mode. When the printer is on-line, it is
ready to receive data from the host.
This key acts as a pause during a
print job by taking the printer off-line.
It can also be used as a pause
function key to stop the printer during
the printing process.
PRINT Potentiometer:
To adjust print darkness
(fine adjustment).
DSW2 & 3: DIP Switches to set operational
parameters of printer.
NOTE: Optional RS232 Communication Card
contains DSW1 switches which are configured
when supplied with the printer.
16
FEED Key: Momentary switch.
Pressing this key feeds one blank
label through the printer when it is
off-line. When the printer is on-line,
another copy of the last label will be
printed.
OFFSET Potentiometer:
To adjust back/forward
feed for dispenser
(+/- 3.75mm).
Operation Manual
PITCH Potentiometer:
Adjusts home position of
the label(+/- 3.75mm).
Affects stop position of
label feed, print position,
and dispense position.
Larger adjustments
should be made using the
Pitch Offset function.
M5900RV