SATO M5900RV Operation Manual page 42

4. Interface Specifications
External Output Signal Types
Vcc = +5V
TYPE 1
TYPE 2
TYPE 3
TYPE 4
42
¼ W pull-up resistor between the open collector out-
put pin and Vcc (pin 13) as illustrated. This will pro-
vide a signal level of +5V for a true condition and 0V
when a false condition exists. The maximum voltage
that can be applied to these pins is +50V and the
maximum current they can sink is 500 milliamps.
Pin 13
1 K ohm, ¼W
Pin 1, 3 4 or 6
+5V
0V
20 milliseconds
+5V
0V
+5V
0V
+5V
0V
(Label Feed
Signal Out
Start Print
End Print
(Label Feed
Stop)
Operation Manual
Stop)
M5900RV