Cancel Print Job - SATO M5900RV Operation Manual

3. Configuration
4. Once the setting is correct, press the FEED key to accept the
setting and advance to the CANCEL PRINT JOB display.
5. You may wish to check your settings by printing a test label after
you have completed the adjustments to ensure that they are cor-
rect.

3.3.6 Cancel print Job

If the printer has a print job(s) loaded in memory, selecting YES will
cause the job(s) to be cleared. The default selection is NO. Make
sure that you want to cancel the print job before selecting YES as
the job cannot be recovered and will have to be retransmitted to the
printer.
To cancel the print perform the following steps:
1. Use the LINE key to step the underlined cursor to either YES or
NO.
2. Once the correct setting is underlined, press the FEED key to
accept the setting and terminate the user mode of operation and
return you to the normal mode OFFLINE display.
If you wish to change any of the settings, you must enter the user
mode again by simultaneously pressing FEED and LINE keys
for more than one second.
30
Operation Manual
M5900RV