Keyboard Power (3-Pin Kbpwr); Figure 1.8 Keyboard Power Setting - Advantech AIMB-564 User Manual

Note:
1.8.2

Keyboard Power (3-pin KBPWR)

This jumper allows you to enable or disable the keyboard wake-up fea-
ture. Set this jumper to pins 2-3 (+5VSB) to wake up the computer when
you press a key on the keyboard (the default is the Space Bar). This fea-
ture requires an ATX power supply that can supply at least 1A on the
+5VSB lead, and a corresponding setting in the BIOS.
P5B-VM DO Keyboard Power Setting
AIMB-564 User Manual
You do not need to clear the RTC when the system hangs due
to overclocking. For system failure due to overclocking, use
the C.P.R. (CPU Parameter Recall) feature. Shut down and
reboot the system so the BIOS can automatically reset
parameter settings to default values.
Due to chipset limitations, AC power off is required prior to
using the C.P.R. function. You must turn off and on the power
supply or unplug and plug the power cord before rebooting the
system.
Figure 1.8: Keyboard Power Setting
2
1
+5V
(Default)
30
KBPWR
3
2
+5VSB