Christie Mirage S+ User Manual page 89

Mirage S+/HD/WU, Matrix S+/HD/WU, Christie HD/DS+/DW, DLV User Manual
020-100001-07 Rev. 1 (11-2009)
This option is also available under the Advanced Image
OPTICAL APERTURE -
Settings menu. See 4.6 – Adjusting the Image for details.
This read-only option lists the lamps most
LAMP HISTORY -
recently installed and recorded in the projector. Lamp History
automatically updates whenever you record a new lamp serial
number—the new lamp is added to the bottom of the list.
Use to record the serial number for a newly installed lamp:
CHANGE LAMP
In the Lamp S/N window, use the number text entry keys to record the new lamp serial
number and press again to accept the change. See Using Slide bars and Other
Controls if you need help entering the number. Once entered, the new lamp serial
number will be added to the Lamp History menu and the Lamp Hours timer will reset
to "0". Lamp Mode and Lamp Limit remain as they were for the previous lamp and
can be changed at any time. See Figure 3.13.
NOTE: To scroll through letters/alpha numerics, refer to 3.4 Navigating the Menus,
Edit Numerical Values.
Lamp
Lamp Hours
Lamp S/N
1. Lamp Message
2. Lamp Limit
3. Lamp Mode
4. Power
5. Intensity
6. Optical Aperture
7. Lamp History
8. Change Lamp
Figure 3.13. Recording the New Lamp Serial Number
NOTE: Enter a serial number only if you have just installed a new lamp. This will
help ensure that lamp timer is not reset on an old lamp and that the number of hours
logged on the lamp will be accurate.
ALWAYS record the serial number of a NEW lamp.
0
?
1000
Power
500
0
New serial# entry
3
automatically updates
Lamp History...
Lamp S/N
...and resets Lamp
IMPORTANT
Section 3: Operation
Lamp History
S/N Hours
5679 1001
1234 0
Hours to "0"
3-59