Christie Mirage S+ User Manual page 43

Editing Text 
Mirage S+/HD/WU, Matrix S+/HD/WU, Christie HD/DS+/DW, DLV User Manual
020-100001-07 Rev. 1 (11-2009)
Communications
Baud Rate for RS232
1.
Baud Rate for RS422
2.
Projector
3.
Network Routing
4.
Ethernet Settings
5.
Broadcast Key
6.
Backlight
7.
Front IR
8.
Back IR
9.
Wired Keypad
0.
If you prefer to quickly scroll through a list without first pulling it down, highlight the
option and use or
NOTES: 1) Press
list. 2) Press
while in a pull-down list to cancel any change.
Exit
ACTIVATE THE EDIT WINDOW:
(such as a channel name) and press
previously entered text is displayed with its first character highlighted in a square
cursor, signifying that this character is ready for editing.
NAVIGATE WITHIN THE EDIT WINDOW:
to move the cursor backwards as desired.
Figure 3.3. Entering Text
ADD OR DELETE A CHARACTER OR SPACE:
press . To delete a highlighted character (or space), press
Func
PRESS (ENTER) WHEN FINISHED:
press (Enter).
115200
115200
004
All Joined
On
On
Off
Example of Pull-Down List
. Press when the desired choice appears.
or to jump between pages in an extra long pull-down
To enter or edit text, highlight the desired parameter
to activate its adjacent edit window. Any
Press
EDIT A CHARACTER:
character, use
through the alphabet, numbers, spaces and
punctuation available. When the character
you need appears, press
the cursor will move to the next character
of current text, if present. Note that you
can also enter a number directly from the
keypad—it will be accepted and the cursor
will move on.
To insert a space at the cursor location,
To accept edits and leave the edit window,
Section 3: Operation
1. Separate
2. RS232 and RS422 Joined
3. RS232 and Ethernet Joined
4. All Joined
to move the cursor forward or
To edit a highlighted
and to scroll
to select it—
Func
.
3-13