Christie Mirage S+ User Manual page 70

Section 3: Operation
3-40
Menu Preferences
— SUBMENU
Adjust the appearance, content
and/or location of on-screen
menus and messages.
Enter a
LARGE MENU FONT —
checkmark to enlarge menus and
their text. You may have to adjust
"Menu Location" to accommodate
the increased menu area.
Use the pull-down list to choose a pre-defined default or
MENU LOCATION —
customized location for the display of all on-screen menus.
To create a custom menu location quickly, choose a preset that is closest to the desired
location. Then adjust "Horizontal Shift" and "Vertical Shift" slide bars to move the
menu to the desired location. Avoid locations too close to a corner or edge to prevent
cropping of larger menus.
HORIZONTAL SHIFT AND VERTICAL SHIFT —
customized menu location.
DISPLAY CHANNEL LIST —
list whenever you press
in the Channel Setup menu will appear here. The "Display Channel List" option
also enables on-screen feedback when using the
channel list and input dialog box while switching channels and sources during a
presentation clear the checkbox.
NOTE: The Channel List and input dialog box cannot be hidden during use of the
menus.
DISPLAY SLIDE BARS —
current image whenever an adjustable parameter is selected directly with a key such as
or . If "Display Slide bars" is unchecked, these slide bars can still be
Bright
Contra st
accessed, but will be hidden during adjustment. This option does not affect slide bars
in menus.
DISPLAY ERROR MESSAGES —
in either the incoming signal or projector. Select "Screen" or "All" (default) to see
brief on-screen messages. This is particularly recommended during setup or testing of
the projector. Or select "Serial Ports" to receive messages via RS232 or RS422 serial
communication only. To hide error message displays, such as during shows and
presentations, select "Off" or "Serial Ports".
Mirage S+/HD/WU, Matrix S+/HD/WU, Christie HD/DS+/DW, DLV User Manual
Shift your menus as desired, creating a
Enter a checkmark if you want to see a scrollable channel
from your presentation. Channels marked with a list icon
C hannel
Enter a checkmark to superimpose a small slide bar over the
Choose how you want to be notified of errors detected
key. If you prefer to hide the
Channel
020-100001-07 Rev. 1 (11-2009)