Christie Mirage S+ User Manual page 118

Section 4: Maintenance
STEP 2 
STEP 3 
STEP 4 
STEP 5 
4-12
Install the lens cap and press the lens release button
See Figure 4.11.
Figure 4.11. Depressing Lens Release
Rotate the lens
Rotate the lens counter-clockwise until
the tabs are free from the lens retainer
ring, see A in Figure 4.12.
NOTE: The connector slide assembly
allows the connector to move as the
lens is rotated.
Pull lens out
Lens connectors will disconnect when
you pull the lens straight out from the
projector, see B in Figure 4.12.
Insert new lens.
NOTE: Remove small rear cap! Keep front cap on.
Mirage S+/HD/WU, Matrix S+/HD/WU, Christie HD/DS+/DW, DLV User Manual
Figure 4.10. Lens Assembly
Figure 4.12. Rotating the Lens
020-100001-07 Rev. 1 (11-2009)