Christie Mirage S+ User Manual page 84

Mirage s+/hd/wu, matrix s+/hd/wu, christie hd/ds+/dw, dlv series
Hide thumbs Also See for Mirage S+:
Table of Contents

Advertisement

Section 3: Operation
Working with PIP 
3-54
Signal Type
Description (Input Location)
#1
5 BNCs (RGBHV or YPbPr)
#2
DVI - I (analog or digital)
#3
Decoded signals (Input 3, Input 4, Composite video, S-Video, or any video
signal via Input 1 BNC connectors or via an analog option card).
#4
Analog Option Cards
#5
Digital Option Cards
#6
Digital Option Cards
*
HD interlaced sources are not recommended for the PIP window.
Other PIP or Seamless Switching tips to keep in mind include:
When using two digital signals or one analog and one digital, each must be ≤ 165
megapixels.
When using two analog signals, each must be ≤ 90 megapixels.
Avoid using an interlaced source in the PIP window
Seamless switching may affect image quality in some cases
NOTE: To control the primary image, access all picture controls through the Main
menu. To control the secondary (PIP) image, access picture controls through the
Picture-in-Picture and Switching menu.
Use the first of six
options in the PIP
and Switching menu
to enable and define
Picture
how you want to use
Picture
PIP.
Options
Swap Main and
PIP Image
Toggle the current picture-in-picture relationship so that the primary (main) image
becomes secondary (PIP), and the secondary image becomes primary. Swapping is
available only when PIP is enabled.
NOTE: There may be a slight delay when swapping the Primary and Secondary
images.
PIP Enable
Short cut: Press
on the Remote if menu not present.
Toggle to display from two
sources at once (Picture-in-
Picture) or the primary source
only. This checkbox turns the
secondary source on and off.
NOTE: Disable PIP and
Best Switching for Interlaced
sources > 35kHz.
Mirage S+/HD/WU, Matrix S+/HD/WU, Christie HD/DS+/DW, DLV User Manual
PIP and Switching
1.
Swap Main and PIP Image
2.
3.
PIP Size & Position
-in-
4.
PIP Image Settings
5.
PIP Border Width
6.
PIP Border Color
7.
Image Optimization
8.
9.
Numbers Select Main Image
PIP Enable
4
Red
Fade Time
PIP Only
020-100001-07 Rev. 1 (11-2009)
Switching
Options
(n/a)

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents