Selecting a Message Window Language
When you receive your printer, the message window language is set to
English. However, status messages and configuration menus can be
displayed in the message window in English, French, German, Italian,
Portuguese, Spanish, Czech, and Japanese.
If you want to change the message window language, use the following
control panel sequence.
Press Key
Special Pages Menu
Config Page
Demo Page
Menu Map
Page
Engine Menu
Energy Saver Set the length of time until the printer enters Energy Saver
34
(Until) Display Reads
IDLE/MAGICOLOR 2300DL
MENU/
LANGUAGE
LANGUAGE SET
ENGLISH
Press the Right or Left key until the appropriate
language is displayed.
<LANGUAGE> is selected.
Print a configuration page.
Print a demonstration page.
Print a menu map (English language only).
mode after it no longer receives print jobs or is not
operated.
If a printjob is received while the printer is in Energy Saver
mode, the printer warms up, then returns to normal print
mode before starting to print.
Selecting a Message Window Language