MINOLTA-QMS magicolor 2300 DL User Manual page 109

Minolta-qms printer magicolor
Hide thumbs Also See for magicolor 2300 DL:
Table of Contents

Advertisement

This message...
MEDIA JAM
DUPLEX UPPER
MEDIA JAM
EXIT
MEDIA JAM
FUSER
MEDIA JAM
TRANSFER ROLLER
MEDIA JAM
TRAY X
X TONER LOW
DRUM LOW
Status, Error, and Service Messages
means...
Media has jammed in
the duplex unit.
Media has jammed
between the print
engine and the output
tray.
A media jam has
been detected
between the fuser
and output tray rollers
located near the top
cover.
Exit jams occur in the
media eject area.
Media has jammed
leaving the fuser
area.
Media jams occur in
the transfer roller
area. This type of jam
means that the media
did not make it to the
paper exit area.
Media has jammed
while being pulled
from the specified
tray (X).
The X (color) toner is
low and should be
replaced within 200
pages at 5%
coverage of letter/A4
pages.
The OPC drum
cartridge is nearing
end of life and should
be replaced or the
quality eventually
fades.
do this...
Locate and remove the
jam.
Replace the specified
color toner.
Replace the OPC drum
cartridge and waste
toner bottle.
103

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents