Transparencies - MINOLTA-QMS magicolor 2300 DL User Manual

Driver
Mode
Weight
Duplexing
Use postcards that are
Recommended for laser printers
Do not use postcards that are
Coated
Designed for inkjet printers
Precut or perforated
Warped

Transparencies

Attention
Use only the MINOLTA-QMS-approved media. Using unsupported
transparencies will result in damaging your printer and in voiding your
warranty. Check www.minolta-qms.com for currently approved media.
To order approved media, go to www.q-shop.com.
Do not fan transparencies before loading them. Resulting static
electricity may cause printing errors.
Do not handle transparencies too much. If you touch the face of the
transparencies with your bare hands, print quality may be affected.
Keep the media path clean. Transparencies are especially sensitive to
a dirty media path. If there are shadows on either the top or the bottom
of the sheets, see chapter 7, "Maintaining the Printer."
Remove transparencies as soon as possible from the output tray to
avoid static buildup.
You can print continuously with transparencies. However, this could affect the
media feed, depending on the media quality, static buildup, and printing
environment.
Format the information to be printed on the transparencies within your
Media Types
Postcard
16–90 lb (60–163 g/m²)
Not supported
If the postcard is warped, press on the warped
area before putting it in Tray 1.Preprinted or
multicolored (may result in media jams)
17