What Is The Guaranteed Imageable (Printable) Area - MINOLTA-QMS magicolor 2300 DL User Manual

application. Try printing your data on a plain sheet of paper first to check
placement.
If you have problems feeding 50 sheets, try loading only 1–10 sheets
at a time. Loading a large number of transparencies at a time may
cause static buildup, thus causing feeding problems.
Capacity
Orientation Face up
Type
Driver
Mode
Duplexing
Use transparencies that are
Approved by MINOLTA-QMS
Do not use transparencies that
Have static electricity that will cause them to stick together

What Is the Guaranteed Imageable (Printable) Area?

The printable area on all media sizes is
up to 0.157" (4 mm) from the edges of
the media.
Each media size has a specific
imageable area, the maximum area on
which the printer can print clearly and
without distortion.
This area is subject to both hardware
limits (the physical media size and the
margins required by the printer) and
software constraints (the amount of
memory available for the full-page frame buffer). The guaranteed imageable
(printable) area for all media sizes is the page size minus 0.157" (4 mm) from
all edges of the media.
Nonguaranteed Area—Media Longer Than 11.7" (297 mm)
Any media longer than 11.7" (297 mm) has an additional nonguaranteed area
of 0.236" (6 mm) on the bottom of each page.
18
Tray 1 Up to 50 transparencies, depending on their
thickness
Tray 2 Not supported
Check www.minolta-qms.com/support (click on Answer Base)
for currently approved media. To order approved media, go to
www.q-shop.com.
Transparency
Not supported
a
a
Printable
Area
a
a = 0.157" (4 mm)
a = 0a = 0.157" (4 mm)
a
Media Types