Power Disconnect; Compliancy; Cleaning - Danish Interpretation Systems DCS 6000 User Manual

Danish Interpretation Systems
The equipment must be connected to earth
(ground).
The wires in the main lead supplied with the
equipment are coloured in accordance with the
following codes:
Green-and-yellow Earth (Ground)
Blue
Brown
The green-and-yellow wire must be connected to
the terminal in the plug marked with the letter E or
with the safety earth symbol or marked with green-
and-yellow colour.
The blue wire must be connected to the terminal
marked with the letter N or marked with black
colour.
The brown wire must be connected to the terminal
marked with the letter L or marked with red colour.
For pluggable equipment, the socket-outlet shall be
installed near the equipment and shall be easily
accessible.

Power Disconnect

Apparatuses with or without ON/OFF switches
have power supplied to the apparatus whenever the
power cord is inserted into the power source;
however, the apparatus is operational only when the
ON/OFF switch is in the ON position. The power
cord is the main power disconnect for all
apparatuses.

Compliancy

The equipment has been tested and found to comply
with the limits of the following standards for digital
devices:
EN55103-1 (Emission)
EN55103-2 (Immunity)
EN60065 safety
UL6500 safety
FCC rules part 15, class A (Emission)
Neutral
Live
Manual 01 18 04438
The device complies with part 15 of the FCC rules.
Operation is subject to the following conditions: (1)
The device may not cause harmful interference, and
(2) the device must accept any interference
received, including interference that may cause
undesired operation.
These limits are designed to provide reasonable
protection against harmful interference when the
equipment is operated in residential, commercial or
light industrial environments. The equipment
generates, uses, and can radiate radio frequency
energy and if not installed and used in accordance
with the user manual it may cause harmful
interference to radio communications.
You are cautioned
modifications not expressly approved in this manual
could void your authority to operate this equipment.
Operation of this equipment in residential area is
likely to cause harmful interference in which case
the user will be required to correct the interference
at his own expense. Intentional or unintentional
changes or modifications not expressly approved by
the party responsible for compliance shall not be
made. Any such changes or modifications could
void the user's authority to operate the equipment.
If necessary, the user should consult the dealer or an
experienced radio/
corrective action.
WARNING: This is a Class A product. In a
domestic environment this product may cause radio
interference in which case the user may be required
to take adequate measures.

Cleaning

To keep the cabinet in its original condition,
periodically clean it with a soft cloth. Stubborn
stains may be removed with a cloth lightly
dampened with a mild detergent solution. Never use
organic solvents such as thinners or abrasive
cleaners since these will damage the cabinet.
User Manual
that any changes
television technician
or
for
7