Labels; Note For Power Connections - Danish Interpretation Systems DCS 6000 User Manual

Danish Interpretation Systems
16 Unplug this apparatus during lighting storms
or when unused for long periods of time. –
Not applicable when special functions are to be
maintained, such as evacuation systems.
17 Refer all servicing to qualified service
personnel. Servicing is required when the
apparatus has been damaged in any way,
such as power-supply cord or plug is
damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus
has been exposed to rain or moisture, does
not operate normally, or has been dropped.
18 Replacement Parts - When replacement parts
are required, be sure the service technician has
used replacement parts specified by the
manufacturer or having the same characteristics
as the original part.
Unauthorized substitutions may result in fire,
electric shock or other hazards.
19 Safety Check - Upon completion of any service
or repairs to this apparatus, ask the service
technician to perform safety checks to determine
that the apparatus is in proper operating
condition.
20 Overloading - Do not overload outlets and
extension cords as this can result in a risk of fire
or electric shock.
21 Power Sources - This apparatus should be
operated only from the type of power source
indicated on the marking label. If you are not
sure of the type of power supply you plan to use,
consult your appliance dealer or local power
company. For apparatuses intended to operate
from battery power, or other sources, refer to the
operating instructions.
22 Power Lines - An outdoor system should not be
located in the vicinity of overhead power lines
or other electric light or power circuits, or where
it can fall into such power lines or circuits.
When installing an outdoor system, extreme care
should be taken to keep from touching such
power lines or circuits, as contact with them
might be fatal.
6
23 Object and Liquid Entry - Never push objects
of any kind into this apparatus through openings
as they may touch dangerous voltage points or
short-out parts that could result in a fire or
electric shock.
Never spill liquid of any kind on the apparatus.
Should any liquid or solid object fall into the
cabinet, unplug the unit and have it checked by
qualified personnel before operating it further.

Labels

enclosure that may be of sufficient magnitude to
constitute a risk of shock to persons.
instructions in the literature accompanying the
product.

Note for Power Connections

Check that the voltage of your local power supply is
within the operating voltage of the unit. If a voltage
conversion is required, consult your DIS dealer or
qualified personnel.
Set the Power switch to OFF if it is not used for
several days.
Manual 01 18 04438
User Manual
"Lightning Flash Symbol" with
the lightning flash
arrowhead symbol within an
equilateral triangle, is intended
to alert the user to the presence
of un-insulated "dangerous
voltage" within the product
"Exclamation Point Symbol"
with the exclamation point
within an equilateral triangle is
intended to alert the user to the
presence of important operating
and maintenance (servicing)
with