Connecting The Dvd Player To A Television; Connecting To A Television Via Scartcable/Rgb; Connecting To A Television Via S-Video - Silvercrest KH 6506 Operating Manual

KH 6506

6. Connecting the DVD Player to a Television

After setting up the DVD player, you can now connect it to a
television. The DVD player can be connected to a television
that operates with the PAL, NTSC and SECAM standards.
If you want to use the DVD player on a television with...
• ... NTSC standard you will have to change the video setting
in the DVD's so called "OSD menu". There PAL is set as the
television standard at the factory.
• SECAM standard you do not need to change any settings.
The factory setting for the PAL standard also allows the
DVD player to operate with SECAM televisions in so far as
these can process the signals.
Ô
On this topic see also capital 8.3 "Video settings: Set the
television standard"
Depending on the features of the television, there are various
options for connecting the DVD player to it:

6.1. Connecting to a Television via ScartCable/RGB

NOTE:
Connecting the DVD player to a television with a Scart cable
via the RGB input offers a high quality connection. Select this
connection variation in the case of televisions equipped with
an RGB input. If you are not sure if the television is equipped
with an RGB input then you can check this by consulting the
television's instruction manual.
• Connect the jack inscribed with EURO SCART to a television
Scart socket by using the supplied Scart cable.
• For playback select the matching channel on your tele-
vision Check with the television's instruction manual on
how you can set the AV channel.
• In the OSD menu select the menu Video/Video out/RGB.
Ô
On this topic see also capital 8.3 "Video settings:
Video out".

6.2. Connecting to a Television via S-Video

NOTE:
For this connections variant the television must be equipped
with an S-video input and two unoccupied audio cinch sockets.
If you are not sure if the television is capable of handling S-video,
for example via cinch sockets, then you can check this by con-
sulting the television's instruction manual.
For this connection variant you will need:
• an audio cinch cable (not supplied)
• an S-video cable (not supplied) These can be obtained
from your dealer.
In order to connect the DVD player to a television via S-video...
• Connect the jack inscribed with S-VIDEO to a television S-video
socket using an S-video cable.
• Insert the white audio cinch cable plug into the cinch socket
inscribed "FL" on the rear panel of the DVD player.
• Then insert the white plug at the other end of the audio
cinch cable into the left channel audio socket on the tele-
vision.
• Insert the red audio cinch cable plug into the cinch socket
inscribed "FR" on the rear panel of the DVD player.
• Then insert the red plug at the other end of the audio
cinch cable into the right channel audio socket on the tele-
vision.
• For playback select the matching channel on your tele-
vision Check with the television's instruction manual on
how you can set the AV channel.
• In the OSD menu select the menu Video/Video out/
S-Video.
Ô
On this topic see also capital 8.3 "Video settings:
Video out".
- 6 -