Download Print this page

Playing Back Dvds, Vcds Or S-Vcds; Features During Playback Of A Dvd, Vcd Or S-Vcd - Silvercrest KH 6506 Operating Manual

Hide thumbs

Advertisement

10. Playing back DVDs, VCDs or S-VCDs

To play back a DVD/VCD/S-VCD with the DVD player...
• Switch on your television.
• Make sure that the DVD player is ready for operation.
If the television, the DVD player and possibly other connected
devices (i.e. an audio component) are ready for operation and
are switched on and the DVD player is connected correctly to
the television you will now see the "SilverCrest" logo on the
TV screen
• Open the disc tray on the front panel of the DVD player by
pressing the button
"OPEN/CLOSE" on the front panel of
the DVD player or on the remote control.
"Open" will now appear In the display on the front panel of
the DVD player and on the television screen.
• Insert a DVD/VCD/S-VCD disc in the disc tray with the in-
scribed/labled side up.
• Press the button
"OPEN/CLOSE" on the front panel of
the DVD player or on the remote control again to close the
disc tray.
"Close" will appear in the display on the front panel of the
DVD player and on the television screen while the disc tray
is closing.
• The contents of the inserted DVD/VCD/S-VCD will now be
loaded; this may take a few seconds. Meanwhile "Load"
will flash in the display on the front panel of the DVD player
and "Read" will appear on the television screen.
• Playback of the inserted DVD/VCD/S-VCD starts automati-
cally.
NOTE:
DVDs, VCDs and S-VCDs, that you want to playback with the
DVD player possibly have a country code, which is printed on
the DVD cover.
The DVD player can only playback DVDs/VCDs/S-VCDs with
the country code 2.
If no country code is printed on the cover of a DVD/VCD/
S-VCD...
• but instead the symbol
can be played back with the DVD player
• Then the DVD/VCD/S-VCD can possibly not be played back
with the DVD player. You can check this by attempting to
play back the DVD.
, then the DVD/VCD/S-VCD
Depending on the inserted DVD/VCD/S-VCD it is possible that
the contents of the DVD/VCD/s-VCD will not playback imme-
diately, rather first a selection menu appears on the television
screen.
In this event select the menu option which will start the play-
back of the film with the control button
mote control.
• To start the playback of the film...
• Press the "OK" button on the remote control.
or
• Press the
"PLAY" button on the front panel of the DVD
player or on the remote control.
"Play" will briefly be superimposed on the television screen.
In the display on the front panel of the DVD player will be
shown...
if you have inserted a DVD:
• "DVD"
• the number of the currently playing title and chapter
• the played back so far time of the currently playing DVD
in hours, minutes and seconds
if you have inserted a VCD/S-VCD:
• "VCD" or "S-VCD"
• the number of the currently playing title
• the played back so far time of the currently playing VCD/
S-VCD in hours,minutes and seconds

10.1. Features during playback of a DVD, VCD or S-VCD

During the playback of a DVD/VCD/S-VCD you can use the
following DVD player features...
Pause playback (Pause)
To pause the playback of the inserted DVD/VCD/S-VCD...
• During playback press the button
panel of the DVD player or the button
the remote control.
"
" will appear in the display on the front panel of the DVD
player and "Pause" will be displayed on the television screen.
On the television screen you will see a freeze frame of the
scene that has just been halted.
• Press the button
skip to the next image.
• To proceed with the playback of the film press the button
"PLAY".
- 13 -
"PAUSE" on the front
"PAUSE/STEP" on
"PAUSE/STEP" on the remote control to
KH 6506
on the re-

Advertisement

loading

  Related Manuals for Silvercrest KH 6506