H Accessing And Launching Real Time Charts - Paradyne OPENLANE User Manual

Using Real Time Charts
Accessing and Launching Real Time Charts
3-2
To display a Real Time Chart from within the Navigation Wizard, you must:
1. Select a device interface or DLCI from the Device Display Area, and
2. Launch a Real Time Chart using either a Chart button at the bottom of the
Device Display Area or the Action Launch Graph dialog.
You also have the ability to set other options through the Navigation Wizard that
affect the display of a Real Time Chart, including changing the Real Time Polling
Frequency, configuring burst and frame options for FrameSaver devices,
managing PVC connections, and so forth.
See Chapter 2, Using the Navigation Wizard
and step-by-step instructions on launching Real Time Charts.
Launching a graph type opens a Real Time Chart window that displays from one
to four graphs. If you select an interface other than a DLCI, a Real Time Chart
window similar to the following is displayed.
for details on setting preferences
May 1999 7800-A2-GB28-80