Diagnostic Tests
Accessing Diagnostic Tests
Accessing from the Navigation Wizard
"
6-2
Diagnostic Tests can be accessed from within the Navigation Wizard or
OpenView as described in the following sections.
The Navigation Wizard lists and displays all devices known to the Performance
Wizard. By selecting a device, physical interface, DLCI, or end-to-end connection
from the Navigation Wizard, you can perform various operations, including
starting Diagnostic Tests.
Procedure
To access Diagnostic Tests from within the Navigation Wizard:
1. Select an object (where object is a device, physical interface, DLCI, or
end-to-end connection) from the Device Display Area.
2. Start Diagnostic Tests using any of the following methods:
— Click on the Tests button.
— Click on the Action menu and select Tests.
— Click on the right mouse button while positioned over an object, then
select Tests from the pop-up menu.
May 1999
7800-A2-GB28-80