Messages; H Error And Status Messages - Paradyne OPENLANE User Manual

Messages

Error and Status Messages
7800-A2-GB28-80
The Messages Table provides suggestions on how to investigate problems with
your network.
If you receive one of the following status or error messages, perform the
recommended action listed in the following table. You may also see error
messages from other software packages, such as OpenView for Windows.
Messages Table (1 of 2)
Message Problem
Missing Data
DLCIs reconfigured.
DSL card inserted or removed.
Link Personality reconfigured.
In Band Management Channel
is down.
Management Port in RS232
mode.
Paradyne device does not
support MIB.
Other vendor device does not
support MIB.
May 1999
A
Action
Perform a Device Sync from
Navigation Wizard.
Perform a Device Sync from
Navigation Wizard.
Perform a Device Sync from
Navigation Wizard.
Some SNMP data is not valid
when link is down. No action
needed.
Some SNMP data not valid for
that configuration. No action
needed.
Contact your nearest sales or
service representative.
Contact device vendor's sales or
service representative.
A-1