Enabling Or Disabling Historical Data Collection For A Device - Paradyne OPENLANE User Manual

Using the Navigation Wizard

Enabling or Disabling Historical Data Collection for a Device

2-18
To collect historical data for a device interface or DLCI, you must enable the
Historical daemon as described in
on page 2-17, then specify the devices for which historical data is to be collected.
The Edit Historical Data Collection dialog is used to enable a device interface or
DLCI for historical data collection. To open the Edit Historical Collection dialog,
use one of the following methods:
H
Position the cursor on the interface or DLCI you want to affect, press the right
mouse button, then select Edit Historical Collections from the pop-up menu.
H
Highlight an interface or DLCI, click on the Edit menu, then select Edit
Historical Collection.
The Edit Historical Collection dialog appears.
The following procedure describes how to enable, modify, or disable Historical
Data Collections for a device interface or DLCI.
Starting and Stopping the Historical Daemon
May 1999 7800-A2-GB28-80