Launching A Historical Chart - Paradyne OPENLANE User Manual

"

Launching a Historical Chart

7800-A2-GB28-80
Procedure
To enable, modify, or disable a historical collection:
1. Select a device interface or DLCI from Navigation Wizard and open the Edit
Historical Collection dialog box.
2. From the drop-down list, locate the chart type that you want to enable or
disable. The View column lists all available chart groups for the selected
interface or DLCI.
3. Enter a time allotment in the Frequency text input field, which specifies how
often information is gathered for the select view. You can also change the
Frequency by clicking on the arrows (spinbox).
4. Select a measurement from the Unit column that specifies how to interpret
the Frequency. Depending on the device selected, available options can
include seconds, minutes, hours, and days.
5. Click on the select box under the Active column to enable or disable a
collection. A check mark indicates that collections are enabled.
6. Press the Test button to verify that data can be collected. The test results are
displayed in the Status Line and the Status column of each view.
7. Click OK.
The Historical Collection column in the Navigation Wizard main window specifies
whether or not the device interface is enabled for historical data collection.
OK indicates that the historical data collection is turned on.
If the Historical daemon does not start, see Appendix A,
A Historical Chart displays a single graph that provides details of previous activity
that you have collected using the Historical daemon and Historical Data
Collection components. You can create Historical Charts for all device interfaces
and DLCIs, and historical charts are available in the following forms:
H
Daily Details charts display historical data from a 24-hour period.
H
Weekly Averaged (trended) charts display historical data in 7-day increments.
May 1999
Using the Navigation Wizard
Messages .
2-19