H Displaying Real Time Charts - Paradyne OPENLANE User Manual

Displaying Real Time Charts
7800-A2-GB28-80
4. Enter a valid numeric value in the Edit text entry box for Frame Range or
Burst Ranges, depending on the options you are setting.
You also have the option of selecting this value from the Frame Size Range
Upper Limit (Octets) or Burst Range Upper Limits (Bits) text selection box,
located at the bottom of the dialog. The Edit text entry box is then populated
with this value.
NOTE:
The highest value listed cannot be entered or selected, as the highest
limit is set by the device itself.
5. Click on Set to update the configuration limit and close the dialog. The Status
field at the bottom of the dialog returns information on the operation.
If you are setting more than one limit, click on Apply to continue setting other
options and retain the display of the dialog. You can then click on Set when
all operations are complete.
From within the Navigation Wizard you can launch a Real Time Chart. A Real
Time Chart provides a view of 1 to 4 graphs that show details on the performance
of a selected device. Information for the charts is gathered from devices based on
a default polling frequency, which you can change.
The following sections discuss how to:
H
Set the Real Time Polling Frequency
H
Launch a Real Time Chart
See Chapter 3, Using Real Time Charts
manage performance.
, for information on using these charts to
May 1999
Using the Navigation Wizard
2-13