Setting The Real Time Polling Frequency - Paradyne OPENLANE User Manual

Using the Navigation Wizard

Setting the Real Time Polling Frequency

"
2-14
The Real Time Polling Frequency specifies how often statistical information is
gathered and plotted for charts by Performance Wizard. By default, the Real Time
Polling Interval is 30 seconds, but you can change this value using the Edit
Preferences Performance dialog. Regardless of the value you set, it is in effect
for all charts, unless you specify a different value for an individual chart at launch
time. See Launching a Real Time Chart
Procedure
To change the Real Time Polling Interval for all charts:
1. Click on the Edit menu and select Preferences. The OpenLane Preferences
dialog appears.
2. From the Performance tab, modify the default polling value of 30 seconds
using one of the following methods:
— Drag the slider. The value selected is displayed in the text entry box,
which is positioned the right of the slider.
— Click on the line to either side of the slider. This increments or
decrements the value by one second and the value is displayed in the
text entry box to the right.
— Enter a value in the text entry box, which is located to the right of the
slider.
The polling frequency you select becomes the default for all charts, unless
you change the polling rate when you launch an individual Real Time Chart.
3. Click on OK.
on page 2-15 for more information.
May 1999 7800-A2-GB28-80