Section Names And Functions - Hitachi KP-FD30 Operation Manual

General
The KP-FD30 is a single CCD type RGB color camera which
utilized the progressive scan CCD image sensor with square
pixel for VGA format of 1 / 2-inch which adopted the RGB
primary color mosaic filter.
Features
●Analog RGB output ( 60 frame/second )
●Small,Compact,Self-contained
●High picture quality (Digital signal processing LSI .(DSP))
●CCD drive functions (Preset electronic shutter,Variable
electric shutter, Auto electronic shutter,
frame / field on demand.)
●Auto level control (AVERAGE,AREA,PEAKE/AVE)
●White balance(Auto,Preset,Manual)
●Auto iris lens (galvanometer type)
●Picture adjustment
(Modes and settings can be selected and adjusted from.)
●NTSC ( VBS,Y/C,RGB ) output
It can be set as the image output of NTSC system by
Switch change.

Section names and functions

③
②
①
⑤ ⑥
④
⑦
Composition
●Camera(with C mount adaptor)
●Operation manual
Optional accessories
●DC input plug ( R03-P3F )
●Lens plug ( E4-191J-100 )
●MULTI cable plug
① C-mount adaptor
（When using a CS-mount lens,remove the C-mount adaptor.）
② Lens mount ring
③ Lens mount screws
④ Set up buttons [ SET/UP/DOWN ]
⑤ Video output connector [ VIDEO OUT]
⑥ DC input connector [ DC IN ]
⑦ MULTI connector [ MULTI ](Inch size screws)
⑧ Lens connector [ LENS ]
Iris control voltage input (galvanometer) type lens
⑨ Camera rear switch
Set the switch according to the type of video signal.
SW-1 ON (Upper side):VGA ( progressive scan ) mode*
OFF (Lower side):NTSC (2:1 interlace scan ) mode
⑧
1 2 3 4
OFF
⑨
Note: Please turn OFF SW-2 and 3 and 4. (They are not used.)
R03-P3F
E4-191J-100
KEC-15P(Housing)
JK-SP2140(Pin cntact)
JK-C151C(Cover)
*Factory setting is
VGA(progressive) mode.
SW:ON