Camera Reset - Hitachi KP-FD30 Operation Manual

6） White balance setting menu ［WHITE BALANCE MENU］
White balance mode is set up.Please set up according to the
operating environment of the camera.
●● ＷＨＩＴＥ ＢＡＬＡＮＣＥ ＭＥＮＵ ●●
ＭＯＤＥ ：ＭＡＮＵＡＬ
Ｒ－ＧＡＩＮ ： ０００
Ｂ－ＧＡＩＮ ： ０００
ＲＥＴ
ＥＮＤ
MODE: MANUAL
●● ＷＨＩＴＥ ＢＡＬＡＮＣＥ ＭＥＮＵ ●●
ＭＯＤＥ ：ＡＴＷ
ＷＢ ＡＲＥＡ ：ＯＮ（ＮＯ．１）
ＡＲＥＡ ＳＥＬＥＣＴ
ＲＥＴ
ＥＮＤ
MODE: ATW
7）Sub menu［SUB MENU］
Changing the picture quality (video response) of the camera
output image. Please set up according to the operating
environment of the camera.
●● ＳＵＢ ＭＥＮＵ ●●
ＩＴＥＭ ：ＰＩＣＴＵＲＥ
ＣＨＲＯＭＡ ＧＡＩＮ ： ０００
ＳＨＡＲＰＮＥＳＳ ： ０００
ＰＥＤＥＳＴＡＬ ： ０００
ＧＡＭＭＡ ：ＯＮ
ＰＯＬＡＲＩＴＹ ：ＰＯＳＩＴＩＶＥ
ＲＥＴ
ＥＮＤ
ITEM: PICTURE
●● ＳＵＢ ＭＥＮＵ ●●
ＩＴＥＭ ：ＰＲＥＳＥＴ
ＳＹＮＣ ＭＯＤＥ ： ＨＤ／ＶＤ
Ｈ ＰＨＡＳＥ ： ０００
ＯＵＴＰＵＴ ：Ｒ，Ｇ，Ｂ
ＳＹＮＣ／ＨＤ ＯＵＴ ：ＳＹＮＣ
ＳＹＮＣ ＯＮ Ｇ ：ＯＦＦ
ＬＥＮＳ ＴＹＰＥ ：ＭＡＮＵＡＬ
ＣＡＭＥＲＡ ＲＥＳＥＴ：ＰＵＳＨ ＳＥＴ
ＲＥＴ
ＥＮＤ
ITEM: PRESET
Select White balance mode
[MANUAL / ATW / AWC]
R Gain adjustment
(*)
[-128～000～+127]
B Gain adjustment
(*)
[-128～000～+127]
Return (Return to the main menu)
End (Return to the normal screen)
(*)Press the Set button;
the numerals flash. Press the Up
and Down buttons to change the
R/B Gain.
Select White balance mode
[MANUAL / ATW / AWC]
White balance detection area select
mode
[OFF / ON]
Go to the white balance detection
area select
Return (Return to the main menu)
End (Return to the normal screen)
Adjustment item selection
[PICTURE / PRESET]
Color level setting(*)
[-128～ 000 ～+127]
Detail level setting(*)
[-128～000～+127]
Pedestal level setting(*)
[-128～000～+127]
Gamma on/off
[ON (γ=0.45)/ OFF(γ=1.0)]
Negative/positive
[POSITIVE / NEGATIVE]
Return (Return to the main menu)
End (Return to the normal screen)
(*)Press the Set button;
the numerals flash. Press the Up
and Down buttons to change the
Color / Detail / Pedestal level.
Adjustment item selection
[PICTURE / PRESET]
Synchronized mode
[INT. / HD/VD]
H Phase adjustment (*)
[-128～000～+127]
Video output setup
[R,G,B / Y/C,VBS]
Synchronized signal output setup
[SYNC / HD]
Sync on Green
[OFF / ON]
Lens type
[MANUAL / AUTO]
Camera initialize(Press the Up and Down
buttons simultaneously for 2 seconds to
return the initial setting.)
(*)Press the Set button;
the numerals flash. Press the Up
and Down buttons to change the
H phase.
●White balance detection area setting
Shift the cursor to Area Select and press the Set button to
display the White balance detection area select menu.
There are 9 White balance detect areas selected by the
Up and Down buttons. After deciding the detection areas,
press the Set button to return to the White balance menu.
ＡＲＥＡ（ＷＢ）
ＮＯ．１
┏━━━━━━┓
┃ ┃
┃ ┃
┗━━━━━━┛
White balance detection area
●● ＷＨＩＴＥ ＢＡＬＡＮＣＥ ＭＥＮＵ ●●
ＭＯＤＥ ：ＡＷＣ
ＰＲＥＳＥＴ ＳＴＡＲＴ ：ＰＵＳＨ ＳＥＴ
Ｒ－ＧＡＩＮ ＯＦＦＳＥＴ： ０００
Ｂ－ＧＡＩＮ ＯＦＦＳＥＴ： ０００
ＲＥＴ
ＥＮＤ
MODE:AWC
●Camera reset:
Press the Set button simultaneously for 2 seconds to
return the initial setting.
An underline portion is the setup at the time of factory
shipments.
Detect area positions
4
６ 5
2
1 3
7 8 9
Select White balance mode
[MANUAL / ATW / AWC]
AWC preset start(A push on a
set switch restarts AWC.)
R Gain offset fine adjustment
(*)
[-128～000～+127]
B Gain offset fine adjustment
(*)
[-128～000～+127]
(*)Press the Set button;
the numerals flash. Press the
Up and Down buttons to
change the R/B Gain offset.